Pedal Electro-harmonix Analogizer Analog Saturation/booster
em 12x
Estoque disponível
Confira a
Características principais
Marca | Electro-Harmonix |
---|---|
Modelo | Analogizer |
Outros
É vocal: Não
Inclui pedal de expressão: Não
Quantidade de efeitos: 1
Tensão de operação: 9V
Instrumentos compatíveis: Guitarra elétrica
Tecnologias do pedal: Análogo
Tipos de efeitos: Sustainer
Tipos de alimentação: Bateria/Fonte 9v
Inclui fonte de alimentação: Não
Peso: 0.4 kg
É kit: Não
Descrição
The antidote to harsh and lifeless sounding digital pedals.
Got the digital blues? Coat your guitar in warm, organic tone. The Electro-Harmonix Analogizer Guitar Effects Pedal thaws out digitally processed guitar, and gives you the sound and feel of an analog delay without the long delay times. Boost your solos with up to 26dB of gain. Fatten your sound. The Analogizer is the antidote to harsh and lifeless sounding digital pedals.
The ANALOGIZER can be used in combination with other effects devices. Experiment with any combination to develop your own unique sound. The footswitch toggles between effect and true bypass modes.
GAIN – Controls the input gain of your ANALOGIZER. The available gain ranges from 0 dB to +"+26dB. As you turn the GAIN knob clockwise, the GAIN increases.
SPREAD – Controls the delay time of the ANALOGIZER. The delay time range is from 3.5 mS to 65 mS. As you turn the SPREAD knob clockwise, the delay time increases. Adjusting the SPREAD knob in the lower half of its range will produce tonal variations in the effect; adjustment in the upper half of the SPREAD knob’s range can be used to thicken up your sound.
BLEND – Varies the mix of direct and effected signals from 100% dry when set to counter-clockwise to 100% wet at full clockwise.
VOLUME – Controls the output level of the ANALOGIZER. As you turn the VOLUME knob clockwise the volume at the output jack increases. The VOLUME control is after the BLEND knob in the circuit.
INPUT JACK – Connect the output of your instrument or another effects pedal to this jack. The input impedance presented at the INPUT jack is 1 M?.
AMP JACK – Connect the AMP jack to your amplifier input or the input of another effects pedal. This is the output of the ANALOGIZER
STATUS LED and FOOTSWITCH – When the STATUS LED is lit, the ANALOGIZER is in effect mode. When the LED is off, the ANALOGIZER is in true bypass mode. Use the FOOTSWITCH to toggle between the two modes.
The ANALOGIZER comes supplied with a 9 Volt battery. The ANALOGIZER can also be powered from a 9VDC AC Adapter capable of delivering at least 20mA. The power supply must have a barrel connector with a center negative plug. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Boss® & Ibanez®).
Features
From 0 to 26db of input gain
The Analogizer's warmth can mask the harshness of the digital signal
Easy to balance for the right amount of analog
Punch in the analog signal with the footswitch
MERCADO LIDER GOLD! TODOS MEUS PRODUTOS SÃO ORIGINAIS E A PRONTA ENTREGA COM ENVIO IMEDIATO!
SEMPRE CONFIRA A QUALIFICAÇÃO E REPUTAÇÃO DOS VENDEDORES
COMPRAS REALIZADAS ATÉ AS 14H SERÃO ENVIADOS NO MESMO DIA!
"Qualidade, garantia, rapidez na entrega e a satisfação do comprador é o meu compromisso""
Confira meus outros itens neste link http://lista.mercadolivre.com.br/_CustId_60490141